Five Advantages Of Products
- New appearance design.
- The articulation frame is adopted and matched with the steering of the front wheel, With small turning radius, maneuvering and flexible.
- The international matching hydraulic parts are adopted, with reliable operation.
- The motions of the blade are fully hydraulically controlled.
- The rear axle is the three-section driving axle which is provided with the NO-SPIN self-locking differential mechanism.
Engine model CUMMINS CTAA8.3 /SC 8D190G2B1
Rated power/speed 138kW/2200 140kW/2300rpm
Operating weight(Standard) 15400kg
Travelling speed ,forward 5,8,11,19,23,38 km/h
Travelling speed ,reverse 5,11,23 km/h
Tractive force(f=0.8) 84KN
Max. gradeability 30%
Tire inflation pressure 260 MPa
Working hydraulic pressure 18 MPa
Transmission pressure 1.3~1.8MPa
Max. steering angle of front wheelsLeft / Right 50°
Max. lean angle of front wheelsLeft / Right 17°
Max. oscillation angle of front axleUp / down 15°
Max. oscillation angle of balance boxBefore / after 15
Frame articulation angleLeft / Right 27°
Min. turning radius using articulation 7.3m
BladeMaximum lift above ground 450mm
Maximum depth of cutting 500mm
Maximum blade position angle 90°
Blade cutting angle 28°_70°
Circle reversing rotation 360°
Moldboard height X width 3965×610mm